Sonnenschein is a compact loudspeaker with a full range driver.
Sonnenschein is a closed-cabinet loudspeaker with drivers of Visaton .
- a xxTyp full range driver a full range driver
The loudspeaker has been developed by Holger Barske and Thomas Schmidt.
The crossover consists of a coil and a resistor to reduce the volume in the mid and highrange.
The frequency response of this speaker is nearly linear. Above 7 kHz the non-linear frequency response is typical for full range loudspeakers. At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 1 % above 400 Hz and doesn't exceed 2 % at 95 dB at 1 m.
the crossover components (right),
to be mounted on a small wooden board.
Kit without cabinet, price per speaker EUR 60,00 excl. VAT: € 50.42 / $ 58.49
Important: The from K + T used amplifier electronic is not included in the kit.
The high-end kit is delivered with baked varnish air core coils on important parts of the crossover for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered.
Kit with high-end-crossover without cabinet, price per speaker EUR 69,00 excl. VAT: € 57.98 / $ 67.26
If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 150x115 mm, tin plated, price per unit: EUR 4,70 excl. VAT: € 3.95 / $ 4.58
We recommend one board per kit (2 boards per speaker pair)