Monacor Soundbar   Shelf speaker as in K+T 2/2016

Technical data
  • impedance: 6 Ohm
  • sensivity (2,83V/1m): 85 dB
  • size (HxWxD): 200 x 1500 x 200 mm
  • frequency range (-8dB): 30 - 23000 Hz
  • crossover frequency(s): Hz
  • speaker type: bass reflex

Monacor Soundbar is an two way F-A.S.T speaker (Fullrange and subwoofer technology) with drivers from Monacor. The kit is delivered with fullrange driver Monacor SPX-31M and woofer Monacor Raptor-6.

Monacor Soundbar has been developed by Steffen Kluge.

The crossover consists of a first order high-pass filter (6 dB per octave slope) for the fullrange driver. The woofers are connected to a first order low-pass filter (6 dB per octave slope).

The frequency response of this speaker is nearly linear, except above 8000 Hz. The decay spectrum shows two small artefacts at 1 and 2 kHz. At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 1% above 300 Hz.

Our kit consists of

  • 2x full range driver Monacor SPX-31M
  • 2x woofer Raptor-6
  • 0,5x PE sealing tape, 5x2 mm, 7.5 m
  • Damping Sonofil 100 x 35 cm for 20 litres
  • 2x Binding Post PK31, gold plated (one pair, red and black)
  • 6m Speaker cable 2x1.5 mm2, transparent
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.

  • 2x Mundorf, electrolytic capacitor, unetched, 68uF / 50 Vdc
  • 2x Mundorf, electrolytic capacitor, unetched, 82uF / 50 Vdc
  • 2x Mundorf H core coil H100, 4.7 mH/0.34 0hm

Kit without cabinet, price per unit / speaker set   EUR 386,00 excl. VAT: € 324.37 / $ 398.97

Kit with high-end crossover

The high-end kit is delivered with a ferrite core coil with low DC resistance. Instead of electrolytic capacitors we deliver foil capacitors of ClarityCap.

Kit with high-end-crossover without cabinet, price per speaker   EUR 466,00 excl. VAT: € 391.60 / $ 481.66

universal PCBs

If you prefer to mount the crossover components on a 140 x 102 mm universal PCB instead on wood:
Universal PCB RA140, order no.. I-2765, price per unit:   EUR 3,70 excl. VAT: € 3.11 / $ 3.82
We recommend one board per kit (two boards for a speaker pair)


Home   Klang+Ton Overview