Maja   Floorstanding as in K+T 2/2015

Technical data
  • impedance: 4 Ohm
  • sensivity (2,83V/1m): 87 dB
  • size (HxWxD): 1200 x 250 x 325 mm
  • frequency range (-8dB): 35 - 30000 Hz
  • crossover frequency(s): 2000 Hz
  • speaker type: bass reflex

Maja is a floorstander. It is developed by Dennis Frank and Daniel Gattig as bass reflex system. Maja contains a Wavecor dome tweeter and two Wavecor woofer.

Our kit consists of

  • Wavecor silk dome tweeter TW030WA09, 4 Ohm
  • 2x Wavecor Mid/Woofer WF182BD12 glass fiber, die cast, 8 Ohm
  • Bass reflex tube HP70, 68x160 mm, black
  • 3x Damping Sonofil 100 x 35 cm for 20 litres
  • Binding Post PK31, gold plated (one pair, red and black)
  • 3m Speaker cable 2x1.5 mm2, transparent
  • Allen wood screws IS 4x16mm, black, 12 pcs
  • Pan screws 4x20 black, 4 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a small wooden board.
  • Audaphon MKP CAP Superior 2.2 uF / 400 Vdc
  • Audaphon MKP CAP Superior 8.2 uF / 400 Vdc
  • Audaphon MKT CAP 2.2 uF / 160 Vdc
  • Audaphon MKT CAP 22 uF / 160 Vdc
  • Audaphon MKT CAP 33 uF / 160 Vdc
  • 0.7 mm air core coil, 0.33 mH/0.48 Ohm
  • 0.7 mm air core coil, 1.0 mH/1.02 Ohm
  • 1.0 mm air core coil, 0.22 mH/0.21 Ohm
  • 1.3 mm air core coil, 1.0 mH/0.32 Ohm
  • 1.4 mm air core coil, 0.33 mH/0.15 Ohm
  • Metal-oxide resistor, 10W 3.3 Ohm (orange-orange-gold)
  • Metal-oxide resistor, 10W 6.8 Ohm (blue-grey-gold)
  • Metal-oxide resistor, 10W 10 Ohm (brown-black-black)
  • Metal-oxide resistor, 10W 33 Ohm (orange-orange-black)

Kit without cabinet, price per speaker   EUR 439,00 excl. VAT: € 368.91 / $ 427.93

Kit with high-end crossover

The high-end kit comes with high-value ClarityCap MKP foil capacitors: type ESA in series to the tweeter. Elsewhere type PWA. The inductances are baked varnished coils or even better copper foil coils for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered.

Kit without cabinet, price per speaker   EUR 629,00 excl. VAT: € 528.57 / $ 613.14

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 14,60 excl. VAT: € 12.27 / $ 14.23

universal PCB

If you prefer to mount the crossover components on a 240 x 165 mm universal PCB instead on wood:
Universal PCB RA240, order no.. I-2767, price per unit:   EUR 7,60 excl. VAT: € 6.39 / $ 7.41
We recommend one board per kit (two boards for a speaker pair)


Home   Klang+Ton Overview