Luna Long is a two way floorstanding speaker.
Luna Long is a bass-reflex cabinet loudspeaker with drivers of Omnes Audio .
The kit is delivered with the following drivers:
- a Omnes Audio AMT 60.1 air motion transformer (ribbon-tweeter)
- a Omnes Audio MW 6G woofer
The loudspeaker has been developed by Thorsten Fischer.
The crossover consists of:
- a 2nd order high-pass filter (12 dB per octave slope) for the tweeter.
- a 2nd order low-pass filter (12 dB per octave slope) for the woofer.
The frequency response of this speaker is nearly linear.
The decay spectrum (waterfall spectrum) shows a decelerated swing-out behaviour in the mid-range.
At low volume, i.e. 85 dB at 1 m, the nonlinear distortions are below 0,8% above 300 Hz and doesn't exceed 1,3% at 95 dB at 1 m between 300 and 15000 Hz.
the crossover components (right),
to be mounted on a small wooden board.
Kit without cabinet, price per speaker EUR 186,00 excl. VAT: € 156.30 / $ 179.75
The high-end kit is delivered with baked varnish air core coils for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the fullrange driver are of type polypropylen (MKP) Clarity-Cap CSA 630 and Audaphon.
Kit with high-end-crossover without cabinet, price per speaker EUR 223,00 excl. VAT: € 187.39 / $ 215.50
If you prefer to mount the crossover components on a universal PCB instead on wood
PCB 150x115 mm, tin plated, price per unit: EUR 4,70 excl. VAT: € 3.95 / $ 4.54
We recommend one board per kit (2 boards per speaker pair)