Celeste   Floorstanding as in Hobby Hifi 6/2013

Technical data
  • impedance: 6 Ohm
  • sensivity (2,83V/1m): 92 dB
  • size (HxWxD): 1100 x 340 x 400 mm
  • frequency range (-8dB): 45 - 20000 Hz
  • crossover frequency(s): 2500 Hz
  • speaker type: bass reflex

Our kit consists of

  • Horn MRH-180
  • Celestion CDX1-1430-Driver
  • Celestion TF1225 woofer
  • 2x Bass reflex tube HP100, 100x200 mm, black
  • 5,5x Damping fleece MT Bondum 800 (30 x 50 x 2 cm)
  • PE sealing tape, 5x2 mm
  • 3x Damping Sonofil 100 x 35 cm for 20 litres
  • Binding Post PK31, gold plated (one pair, red and black)
  • 3m Speaker cable 2x1.5 mm2, transparent
  • Allen wood screws, black, 5x30 mm, 8 pieces
  • Plan for DIY kit

the crossover components (right),
to be mounted on a piece of wood
  • Audaphon MKP CAP Superior 2.7 uF / 400 Vdc
  • Audaphon MKP CAP Superior 3.3 uF / 400 Vdc
  • Audaphon MKP CAP Superior 8.2 uF / 400 Vdc
  • Mundorf, electrolytic capacitor, etched, 220 uF/63 Vdc
  • Audaphon air core coil L7, 0.22 mH/0.39 Ohm
  • Audaphon air core coil L7, 0.39 mH/0.49 Ohm
  • Mundorf air core coil L140, 3.3 mH/0.58 Ohm
  • Mundorf Aronit core coil a71 12mH/2.55Ohm
  • Ceramic resistor 2.2 Ohm/10 Watt
  • Metal-oxide resistor, 5W 6.8 Ohm (blue-grey-gold)
  • 2x Metal-oxide resistor, 10W 3.9 Ohm (orange-white-gold)

Kit without cabinet, price per speaker   EUR 387,00 excl. VAT: € 325.21 / $ 377.24

Kit with high-end crossover

  • 3m Inakustik Premium LS Silver, silver plated copper cable
  • ClarityCap SA capacitor 2.7 uF / 630 Vdc
  • ClarityCap SA capacitor 3.3 uF / 630 Vdc
  • ClarityCap SA capacitor 8.2 uF / 630 Vdc
  • Mundorf, electrolytic capacitor, etched, 220 uF/63 Vdc
  • Mundorf baked varnish air core coil BL71, 0.22 mH/0.34 Ohm
  • Mundorf baked varnish air core coil BL71, 0.39 mH/0.51 Ohm
  • Mundorf baked varnish air core coil BL140, 3.3 mH/0.59 Ohm
  • Mundorf Aronit core coil ba71 12mH/2.55Ohm
  • Ceramic resistor 2.2 Ohm/10 Watt
  • Metal-oxide resistor, 5W 6.8 Ohm (blue-grey-gold)
  • 2x Metal-oxide resistor, 10W 3.9 Ohm (orange-white-gold)

Kit with high-end-crossover without cabinet, price per speaker   EUR 423,00 excl. VAT: € 355.46 / $ 412.34

Impedance correction

If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).


Price per impedance correction for one speaker, to be mounted on a small wooden board.     EUR 8,15 excl. VAT: € 6.85 / $ 7.94

universal PCB

If you prefer to mount the crossover components on a 159 x 127 mm universal PCB instead on wood:
Universal PCB RA160, order no.. I-2766, price per unit:   EUR 5,10 excl. VAT: € 4.29 / $ 4.97
We recommend one board per kit (two boards for a speaker pair)


Home   Hobby HiFi Overview