Capella Micro is a two way compact speaker.
Capella Micro is a bass-reflex cabinet loudspeaker with drivers of Mivoc .
The kit is delivered with the following drivers:
- a Mivoc KFT 130 M tweeter
- a Mivoc XAW 110 HC-Black woofer
The loudspeaker has been developed by Bernd Timmermanns.
The crossover consists of:
- a 3rd order high-pass filter (18 dB per octave slope) for the tweeter.
- a 2nd order low-pass filter (12 dB per octave slope) for the woofer.
The frequency response of this speaker is nearly linear.
The decay spectrum is perfect.
At medium volume, i.e. 90 dB at 1 m, the nonlinear distortions are below 0,6% above 500 Hz.
the crossover components (right),
to be mounted on a small wooden board.
Kit without cabinet, price per speaker EUR 139,00 excl. VAT: € 116.81 / $ 134.33
The high-end kit is delivered with baked varnish air core coils for minimizing microphonic effects. - The current flow through the coil creates a magnetic field which sets the reel of wire in motion. This motion induces a voltage in the coil which adds itself to the signal. The stiffer the reel of wire is, the less the signal will be altered. The capacitors for the tweeter are of type polypropylen (MKP) Clarity-Cap SA 630.
Kit with high-end-crossover without cabinet, price per speaker EUR 165,00 excl. VAT: € 138.66 / $ 159.45
Kit without cabinet, price per unit EUR 14,25 excl. VAT: € 11.97 / $ 13.77
Kit without cabinet, price per unit EUR 42,50 excl. VAT: € 35.71 / $ 41.07
Kit without cabinet, price per unit EUR 13,25 excl. VAT: € 11.13 / $ 12.80
Kit without cabinet, price per unit EUR 35,00 excl. VAT: € 29.41 / $ 33.82
Kit without cabinet, price per unit EUR 13,60 excl. VAT: € 11.43 / $ 13.14
Kit without cabinet, price per unit EUR 31,30 excl. VAT: € 26.30 / $ 30.25
If you want to use a valve amplifier with this speaker an impedance correction should be employed. In this case the component quality is less important; therefore, we offer only one kit (upon request higher quality components are available).
If you prefer to mount the crossover components on a 140 x 102 mm universal PCB instead on wood:
Universal PCB RA140, order no.. I-2765, price per unit: EUR 3,70 excl. VAT: € 3.11 / $ 3.58
We recommend one board per kit (two boards for a speaker pair)
Hobby HiFi Overview