Aldan, Subwoofer   as in K+T 6/2012

Aldan is a subwoofer capable of producing extremely low bass from small cabinet.
Technical data
- impedance: 4 Ohm
- sensivity (2,83V/1m): 85 dB
- size (HxWxD): 600 x 250 x 319 mm
- frequency range (-8dB): 24 - Hz
- crossover frequency(s): Hz
- speaker type: passive radiator

Aldan is a subwoofer capable of producing extremely low bass from small cabinet. To achieve this, the Wavecor SW223 BD01 was combined with a matching passive radiator. Depending on the set-up (by means of adding weight to the passive membrane or choice of subwoofer amplifier) this sub may be used as low bass expert or as standard type.

 

Our kit consists of

  • Wavecor Subwoofer SW223BD01, die cast, 4 Ohm
  • Wavecor PR223BD01 Passive Radiator, die cast
  • Detonation subwoofer module, DT 150, 150W
  • 2x Speaker cable 2x1.5 mm2, transparent
  • 1,5x Pan screws 4x20 black, 8 pieces
  • 1,5x Allen wood screws, black, 5x30 mm, 8 pieces
  • Plan for DIY kit

Kit without cabinet, price per speaker - not available, because DT-150 is no longer available.

For amplification we recommend different amplifiers.


Kit Aldan with amplifier module Mivoc AM80 MK II

Mivoc AM 80 technical data of Mivoc AM 80:
- output: 80/160 Watt into 4 Ohm
- cut-off frequency: adjustable 50-150 Hz, 12 db/oct

Subwoofer module Mivoc AM 80 is a module with gain control, cut-off frequency control and phase inversion switch. RCA sockets (to connect to pre-amp out) and binding posts (to connect to the main amp) are available. The satellites may be looped through the module. Required cut-out see description of the module.

Order No. str-aldan-am80,   Price for one subwoofer kit with amplifier AM80 (without cabinet):   - not available

Kit Aldan with amplifier module Audaphon AMP-24

The kit is also available with 8 Ohm Wavecor subwoofer SW223BD03 and amplifier Audaphon AMP-24 with digital signal processor (DSP) and power amplifier (bridged it provides 180 W RMS at 8 Ohm).

The plate amplifier provides:

  • 2x 90 Watt RMS into 4 Ohm
  • or 180 Watt RMS into 8 Ohm (bridged)
  • The possibility to adapt the amplifier to the loudspeaker or subwoofer.
  • In addition the possibility to tune the DSP according to room conditions.
  • We would like to help you tuning the signal processors for your room.
  • Or we delivered them tuned for your room.

Additional information on digital signal processors (DSP): what is a DSP?, Tuning according to room conditions and Examples Of DSP use (e.g. in subwoofers).

Required cut-out for the amplifier see description of the module

.

Order No. str-aldan-amp24,   Price for one subwoofer kit with amplifier AMP-24 (without cabinet):   - not available


Home   Klang+Ton Overview